Welcome to BeiErBian Group Co., Ltd!

EN | CN | Sitemap | |

National Service Hotline:

010-58612111

電力變壓器廠家,高低壓成套設備廠商
Your current location : Home >> News >> News information

What are the structural characteristics of dry-type transformer?

2021-03-18 10:30:16
Times

1. The iron core is made of silicon steel sheet. The iron core of dry-type transformer is made of silicon steel tape( High quality cold-rolled grain oriented silicon steel sheet is used to complete the electric energy magnetic energy electric energy conversion, and 45 degree full inclined seam is used for the core silicon steel sheet to make the magnetic flux pass along the seam direction of the silicon steel sheet.


Power transformer manufacturer

2. The winding consists of primary and secondary groups (d-angle or Y-star)


(1) Winding type


(2) Filling and pouring with quartz sand


(3) Glass fiber reinforced casting (i.e. thin insulation structure)


(4) Multi strand glass fiber impregnation winding


3. High voltage winding generally adopts multi-layer cylinder or multi-layer segmented structure


4. Low voltage winding generally adopts layer or foil structure


5. Accessories: the insulator includes primary and secondary insulation, turn to turn insulation and insulation with iron core and shell. Materials used: DMD, mesh, alkali and wax free cellophane tape, etc.

label

qrcode.png

掃一掃 訪問官網

contact

Tel:010-58612111

E-mail:bjbeb@bjbeb.com

Website:www.bjbeb.com

Add:3 Rongjing East Street, Beijing Economic and
   Technological Development Zone, Beijing

Specializing in ,Welcome to inquire!